1K Primer SurfacerQ-608 (1KCar body repair paster) Polyester Putty
Place of origin:
Composition: modulation from. synthesis of fatty ester resin ,add
pigments, fillers, additives(auxiliaries) and organic solvents.
Uses: It is the seal car paint after putty, red or gray paste be
Usage: spraying after use our factory’s nitro lacquer thinner
mixing viscosity, grinding after dry, after formation can coat the
Dry fast, esay sanding, single-component intermediate paint,use
convenient, Good inter-coat adhesion, good filling, good hide
power, is easy to fill small scratch marks, pinholes and surface
flaws. easy to sandQ-608 in red, Q—608 in gray,Q-608 in yellow are available.
Applicable base materials
Thoroughly sand and intact existing layer surface, (Original paint and completely dry 2K paint paint
and putty surface).
Inapplicable base materials
Aluminum and stainless steel plastic galvanized steel and wood.
Q-608 Single-component Filler;
spread with putty knife
2-3 layers, 15-25μm in total
5-10 minutes, 20
Geocentric spray gun (upper bottle) 1.4-1.6mm; 3-5kg/cm2
Suction spray gun (lower bottle) 1.3-1.8mm; 3-5kg/cm2
20 30 minutes
After curing and Sanding, re-coat the top coat of our company.
Store for more than two years keep in original container at 20.
1. Not suitable for direct application over bare metals & wood.
2. It is recommended for spot repair but not for large area
3. It is recommended to use 2K primer surface to achieve good adhesion
and strong corrosion resistance.